R95 API 5CT Casing

Wholesale Casing Pipes in China and Europe

exploring the differences in wholesale casing Pipe Prices between china and Europe The global market for casing pipe is highly…

exploring the differences in wholesale casing Pipe Prices between china and Europe

The global market for casing pipe is highly competitive, with prices varying significantly between different regions. This paper seeks to explore the differences in wholesale casing pipe prices between China and Europe, and to identify the factors that contribute to these differences.

alt-930

Labels a           Calculated Mass c
    Nominal linear Mass T& C b,c wall Thick- ness       em, Mass Gain or Loss Due to End finishing d
  Outside diameter     Inside Diameter Drift Diameter Plain- end kg
              Round Thread Buttress Thread
            wpe        
  D kg/m t D mm kg/m Short Long RC SCC
  mm   mm mm            
1 2 3 4 5 6 7 8 9 10 11 12
13 3/8 48 339.72 71.43 8.38 322.96 318.99 68.48 15.04 — 17.91
13 3/8 54.5 339.72 81.1 9.65 320.42 316.45 78.55 13.88 16.44
13 3/8 61 339.72 90.78 10.92 317.88 313.91 88.55 12.74 14.97
13 3/8 68 339.72 101.19 12.19 315.34 311.37 98.46 11.61 14.97
13 3/8 68 339.72 101.19 12.19 315.34 311.37 98.46 11.67 f 14.33
13 3/8 72 339.72 107.15 13.06 313.6 311.15 e 105.21 10.98 13.98
13 3/8 72 339.72 107.15 13.06 313.6 311.15 e 309.63 309.63 105.21 10.91 f 14.33
13 3/8 72 339.72 107.15 13.06 313.6   105.21 10.98 13.98
13 3/8 72 339.72 107.15 13.06 313.6   105.21 10.91 e  
16 65 406.4 96.73 9.53 387.4 382.57 96.73 18.59 — 20.13
16 75 406.4 111.61 11.13 384.1 379.37 108.49 16.66 18.11
16 84 406.4 125.01 12.57 381.3 376.48 122.09 14.92
16 109 406.4 162.21 16.66 373.1 368.3 160.13  
18 5/8 87.5 473.08 130.21 11.05 450.98 446.22 125.91 33.6 39.25
20 94 508 139.89 11.13 485.7 480.97 136.38 20.5 27.11 24.78
20 94 508 139.89 11.13 485.7 480.97 136.38 20.61 27.26 g 24.27 17.84 24.78
20 106.5 508 158.49 12.7 482.6 477.82 155.13 18.22   22
20 133 508 197.93 16.13 475.7 470.97 195.66 13.03   16.02
NOTE See also Figures D.1, D.2, and D.3.
a Labels are for information and assistance in ordering.
b Nominal linear masses, threaded and coupled (Column 4) are shown for information only.
c The densities of martensitic chromium steels ( L80 types 9Cr and 13Cr) are less than those of carbon steels; The masses shown are therefore not accurate for martensitic chromium steels; A mass correction factor of 0.989 shall be used.
d Mass gain or loss due to end finishing; See 8.5.
e Drift diameter for most common bit size; This drift diameter shall be specified in the purchase agreement and marked on the pipe; See 8.10 for drift requirements.
f based on 758 mPa minimum yield strength or greater.
g Based on 379 mPa minimum yield strength.

The analysis begins by examining the average Wholesale Prices of casing pipe in China and Europe. Data from the World Steel Association shows that the average wholesale price of casing pipe in China is significantly lower than in Europe. This is largely due to the fact that China has a much larger production capacity for steel products, allowing them to produce casing pipe at a lower cost. Additionally, the chinese government has implemented a number of policies to encourage the production of steel products, such as subsidies and tax breaks, which further reduce the cost of production.

The next step in the analysis is to identify the factors that contribute to the differences in wholesale casing pipe prices between China and Europe. One of the most significant factors is the cost of raw materials. China has access to a wide range of low-cost raw materials, such as iron ore and coal, which helps to reduce the cost of production. Additionally, the Chinese government has implemented a number of policies to encourage the production of steel products, such as subsidies and tax breaks, which further reduce the cost of production.

Labels a           Calculated Mass c
    Nominal Linear Mass T& C b,c Wall Thick- ness       em, Mass Gain or Loss Due to End Finishing d
  Outside Diameter     Inside Diameter Drift Diameter Plain- end kg
              Round Thread Buttress Thread
            wpe        
  D kg/m t D mm kg/m Short Long RC SCC
  mm   mm mm            
1 2 3 4 5 6 7 8 9 10 11 12
13 3/8 48 339.72 71.43 8.38 322.96 318.99 68.48 15.04 — 17.91
13 3/8 54.5 339.72 81.1 9.65 320.42 316.45 78.55 13.88 16.44
13 3/8 61 339.72 90.78 10.92 317.88 313.91 88.55 12.74 14.97
13 3/8 68 339.72 101.19 12.19 315.34 311.37 98.46 11.61 14.97
13 3/8 68 339.72 101.19 12.19 315.34 311.37 98.46 11.67 f 14.33
13 3/8 72 339.72 107.15 13.06 313.6 311.15 e 105.21 10.98 13.98
13 3/8 72 339.72 107.15 13.06 313.6 311.15 e 309.63 309.63 105.21 10.91 f 14.33
13 3/8 72 339.72 107.15 13.06 313.6   105.21 10.98 13.98
13 3/8 72 339.72 107.15 13.06 313.6   105.21 10.91 e  
16 65 406.4 96.73 9.53 387.4 382.57 96.73 18.59 — 20.13
16 75 406.4 111.61 11.13 384.1 379.37 108.49 16.66 18.11
16 84 406.4 125.01 12.57 381.3 376.48 122.09 14.92
16 109 406.4 162.21 16.66 373.1 368.3 160.13  
18 5/8 87.5 473.08 130.21 11.05 450.98 446.22 125.91 33.6 39.25
20 94 508 139.89 11.13 485.7 480.97 136.38 20.5 27.11 24.78
20 94 508 139.89 11.13 485.7 480.97 136.38 20.61 27.26 g 24.27 17.84 24.78
20 106.5 508 158.49 12.7 482.6 477.82 155.13 18.22   22
20 133 508 197.93 16.13 475.7 470.97 195.66 13.03   16.02
NOTE See also Figures D.1, D.2, and D.3.
a Labels are for information and assistance in ordering.
b Nominal linear masses, threaded and coupled (Column 4) are shown for information only.
c The densities of martensitic chromium steels (L80 Types 9Cr and 13Cr) are less than those of carbon steels; The masses shown are therefore not accurate for martensitic chromium steels; A mass correction factor of 0.989 shall be used.
d Mass gain or loss due to end finishing; See 8.5.
e Drift diameter for most common bit size; This drift diameter shall be specified in the purchase agreement and marked on the pipe; See 8.10 for drift requirements.
f Based on 758 mPa minimum yield strength or greater.
g Based on 379 mPa minimum yield strength.

casing pipe China high-grade Supplier,casing pipe China good manufacturer,casing pipe wholesale-price high-quality best China,In addition to the cost of raw materials, the differences in labor costs between China and Europe also contribute to the differences in wholesale casing pipe prices. Chinese labor costs are significantly lower than those in Europe, allowing Chinese producers to produce casing pipe at a lower cost. Additionally, the Chinese government has implemented a number of policies to encourage the production of steel products, such as subsidies and tax breaks, which further reduce the cost of production.

Finally, the differences in transportation costs between China and Europe also contribute to the differences in wholesale casing pipe prices. Chinese producers are able to ship their products to Europe at a lower cost than European producers, due to the lower cost of shipping from China. Additionally, the Chinese government has implemented a number of policies to encourage the production of steel products, such as subsidies and tax breaks, which further reduce the cost of production.

In conclusion, this paper has explored the differences in wholesale casing pipe prices between China and Europe. The analysis has identified a number of factors that contribute to these differences, including the cost of raw materials, labor costs, and transportation costs. Additionally, the Chinese government has implemented a number of policies to encourage the production of steel products, such as subsidies and tax breaks, which further reduce the cost of production.

Similar Posts