PIPE 10″ PVC BE WELL CASING SCH 40

how to Install a 10″ PVC BE well casing SCH 40 for Maximum durability Installing a 10” PVC BE WELL…

how to Install a 10″ PVC BE well casing SCH 40 for Maximum durability

Installing a 10” PVC BE WELL CASING SCH 40 for maximum durability is a great way to ensure your well is safe and secure. with the right tools and materials, you can easily install this casing in no time. Here’s how:

1. Start by gathering the necessary tools and materials. You’ll need a 10” PVC BE WELL CASING SCH 40, a PVC primer, PVC cement, a hacksaw, a level, a drill, a hammer, and a wrench.

Tensile and hardness requirements
grade     yield strength MPa Tensile Strength Hardness a,c Specified wall thickness Allowable Hardness Variation b
  type Total Elongation Under Load   min MPa max    
      min max   HRC HBW mm HRC
1 2 3 4 5 6 7 8 9 10
h40 0.5 276 552 414
J55 0.5 379 552 517
K55 0.5 379 552 655
N80 1 0.5 552 758 689
N80 Q 0.5 552 758 689
R95 0.5 655 758 724
L80 L80 1 0.5 552 655 655 23 241
L80 9Cr 13Cr 0.5 552 655 655 23 241
    0.5 552 655 655 23 241
C90 1 0.5 621 724 689 25.4 255 £12.70 3
                12.71 to 19.04 4
                19.05 to 25.39 5
                ³ 25.40 6
T95 1 0.5 655 758 724 25.4 255 £12.70 3
                12.71 to 19.04 4
                19.05 to 25.39 5
                ³ 25.40 6
C110 0.7 758 828 793 30 286 £12.70 3
                12.71 to 19.04 4
                19.05 to 25.39 5
                ³ 25.40 6
P110 0.6 758 965 862
Q125 1 0.65 862 1034 931 b £12.70 3
                12.71 to 19.04 19.05 4
                  5
a In case of dispute, laboratory Rockwell C hardness testing shall be used as the referee method.
b No hardness limits are specified, but the maximum variation is restricted as a manufacturing control in accordance with 7.8 and 7.9.
c For through-wall hardness tests of grades L80 (all types), C90, T95 and C110, the requirements stated in HRC scale are for maximum mean hardness number.

2. Measure the area where you’ll be installing the casing. make sure the area is level and free of debris.

3. cut the casing to the desired Length using the hacksaw.

4. Apply the PVC primer to the ends of the casing and the area where it will be installed.

5. Apply the PVC cement to the same areas.

alt-8410

 API 5ct l80 casing Tubing Grade Color codes
Grade Grade Type Number and Color of Bands for Product a with Length ³ 1.8 m Color(s) for couplings
      Entire Coupling Band(s) b, c
1 2 3 4 5
H40 None or black band at the manufacturer’s option None Same as for Pipe
j55 tubing One bright green Bright green None
J55 Casing One bright green Bright green One white
K55 Two bright green Bright green None
N80 1 One red Red None
N80 Q One red, one bright green Red Green
R95 One brown Brown None
L80 1 One red, one brown Red One brown
L80 9Cr One red, one brown, two yellow None Two yellow
L80 13Cr One red, one brown, one yellow None One yellow
C90 1 One purple Purple None
T95 1 One silver Silver None
C110 One white, two brown White Two brown
P110 One white White None
Q125 1 One orange Orange None
a In the case of coupling material, unless otherwise specified in the purchase agreement, the manufacturer’s internal requirements shall govern.
b special clearance couplings shall also have a black band.
c Seal-ring couplings shall also have a blue band.

6. Place the casing in the desired area and use the level to make sure it is level.

7. Secure the casing in place with the drill and hammer.

8. Use the wrench to tighten the screws.

9. Allow the cement to dry for 24 hours before using the well.
oil Tube chinese high-grade wholesaler,casing pipe china good company,
Installing a 10” PVC BE WELL CASING SCH 40 is a great way to ensure your well is safe and secure. With the right tools and materials, you can easily install this casing in no time. So don’t wait any longer, get started on your project today and enjoy the peace of mind that comes with knowing your well is safe and secure.

benefits of Using 10″ PVC BE WELL CASING SCH 40 for Your Well Casing

Similar Posts