20MPa Truck Mounted Boiler Hot Oil Equipment Steam Generator Device for Flushing Tubing Casing Zyt Petroleum Equipment
The Benefits of Using a 20MPa Truck Mounted Boiler Hot Oil Equipment Steam Generator Device for Flushing Tubing Casing in…
The Benefits of Using a 20MPa Truck Mounted Boiler Hot Oil Equipment Steam Generator Device for Flushing Tubing Casing in the Petroleum Industry
The petroleum industry is a vital sector that plays a crucial role in the global economy. It involves the exploration, extraction, refining, and distribution of petroleum products. One of the essential processes in this industry is the flushing of tubing casing, which is necessary to remove any debris or contaminants that may hinder the smooth flow of oil or gas. To accomplish this task efficiently, the use of a 20MPa truck-mounted boiler hot oil equipment steam generator device is highly recommended. This steam generator device is specifically designed to provide high-pressure steam for flushing tubing casing. With a pressure rating of 20MPa, it can generate steam at a temperature of up to 350 degrees Celsius. This high-pressure steam is crucial in effectively removing any obstructions or contaminants that may be present in the tubing casing. The device is mounted on a truck, making it highly mobile and easily transportable to different locations within the petroleum field.
One of the significant benefits of using this steam generator device is its efficiency. The high-pressure steam it produces ensures thorough cleaning of the tubing casing, leaving no room for any debris or contaminants. This efficiency translates to improved productivity and reduced downtime in the petroleum industry. With a clean tubing casing, the flow of oil or gas is optimized, resulting in increased production and profitability.
| Labels a | Calculated Mass c | ||||||||||
| Nominal Linear Mass T& C b,c | Wall Thick- ness | em, Mass Gain or Loss Due to End Finishing d | |||||||||
| Outside Diameter | Inside Diameter | Drift Diameter | Plain- end | kg | |||||||
| Round Thread | Buttress Thread | ||||||||||
| wpe | |||||||||||
| D | kg/m | t | D | mm | kg/m | Short | Long | RC | SCC | ||
| mm | mm | mm | |||||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| 13 3/8 | 48 | 339.72 | 71.43 | 8.38 | 322.96 | 318.99 | 68.48 | 15.04 | — | — 17.91 | — |
| 13 3/8 | 54.5 | 339.72 | 81.1 | 9.65 | 320.42 | 316.45 | 78.55 | 13.88 | — | 16.44 | — |
| 13 3/8 | 61 | 339.72 | 90.78 | 10.92 | 317.88 | 313.91 | 88.55 | 12.74 | — | 14.97 | — |
| 13 3/8 | 68 | 339.72 | 101.19 | 12.19 | 315.34 | 311.37 | 98.46 | 11.61 | — | 14.97 | — |
| 13 3/8 | 68 | 339.72 | 101.19 | 12.19 | 315.34 | 311.37 | 98.46 | 11.67 f | — | 14.33 | — |
| 13 3/8 | 72 | 339.72 | 107.15 | 13.06 | 313.6 | 311.15 e | 105.21 | 10.98 | — | 13.98 | — |
| 13 3/8 | 72 | 339.72 | 107.15 | 13.06 | 313.6 | 311.15 e 309.63 309.63 | 105.21 | 10.91 f | — | 14.33 | — |
| 13 3/8 | 72 | 339.72 | 107.15 | 13.06 | 313.6 | 105.21 | 10.98 | — | 13.98 | — | |
| 13 3/8 | 72 | 339.72 | 107.15 | 13.06 | 313.6 | 105.21 | 10.91 e | — | — | ||
| 16 | 65 | 406.4 | 96.73 | 9.53 | 387.4 | 382.57 | 96.73 | 18.59 | — | — 20.13 | — |
| 16 | 75 | 406.4 | 111.61 | 11.13 | 384.1 | 379.37 | 108.49 | 16.66 | — | 18.11 | — |
| 16 | 84 | 406.4 | 125.01 | 12.57 | 381.3 | 376.48 | 122.09 | 14.92 | — | — | — |
| 16 | 109 | 406.4 | 162.21 | 16.66 | 373.1 | 368.3 | 160.13 | — | — | — | |
| 18 5/8 | 87.5 | 473.08 | 130.21 | 11.05 | 450.98 | 446.22 | 125.91 | 33.6 | — | 39.25 | — |
| 20 | 94 | 508 | 139.89 | 11.13 | 485.7 | 480.97 | 136.38 | 20.5 | 27.11 | 24.78 | — |
| 20 | 94 | 508 | 139.89 | 11.13 | 485.7 | 480.97 | 136.38 | 20.61 | 27.26 g 24.27 17.84 | 24.78 | — |
| 20 | 106.5 | 508 | 158.49 | 12.7 | 482.6 | 477.82 | 155.13 | 18.22 | 22 | — | |
| 20 | 133 | 508 | 197.93 | 16.13 | 475.7 | 470.97 | 195.66 | 13.03 | 16.02 | — | |
| NOTE See also Figures D.1, D.2, and D.3. | |||||||||||
| a Labels are for information and assistance in ordering. | |||||||||||
| b Nominal linear masses, threaded and coupled (Column 4) are shown for information only. | |||||||||||
| c The densities of martensitic chromium steels (L80 Types 9Cr and 13Cr) are less than those of carbon steels; The masses shown are therefore not accurate for martensitic chromium steels; A mass correction factor of 0.989 shall be used. | |||||||||||
| d Mass gain or loss due to end finishing; See 8.5. | |||||||||||
| e Drift diameter for most common bit size; This drift diameter shall be specified in the purchase agreement and marked on the pipe; See 8.10 for drift requirements. | |||||||||||
| f Based on 758 mPa minimum yield strength or greater. | |||||||||||
| g Based on 379 mPa minimum yield strength. | |||||||||||
